YeeLight Setup

This guide will assist you in setting up YeeLight with F1MV-Lights-Integration.

Requirements

• One or more YeeLight devices are required.

Setup

Note

Before continuing, ensure that your YeeLight devices are connected to your network.

1. Ensure that you have installed F1MV-Lights-Integration. If not, please refer to the installation page.
2. Start F1MV-Lights-Integration and click the "Settings" button in the top right corner of the window.
3. Scroll down to the "YeeLight Settings" section and ensure that the "Disable YeeLight integration" option is unchecked.

YeeLight Checkbox

5. Open the YeeLight app on your mobile device and obtain the IP address of each YeeLight device you want to use.

In the same "YeeLight" section, remove any text in the input field and enter the IP's of the lights you want to use, separated by a comma.

YeeLight IP Address Input Field

For example, if you want to use the lights with the IP's "192.168.1.5", "192.168.1.6" and "192.168.1.7", you would enter "192.168.1.5,192.168.1.6,192.168.1.7" (without the quotes).

After entering the IP's of the lights you want to use, click the "Home" button in the top right corner of the main window.

You can now use the simulation buttons to test your lights.

Troubleshooting

Please refer to the troubleshooting page if you encounter any issues.